Edge of dock levelers are an ideal solution for controlled dock environments where dock height and trailer height are properly matched. Designed for use with forklift trucks, the Koke Edge of Dock leveler can be an economical solution.
The edge of dock leveler is quick and easy to operate. Just pull back the self-storing handle towards the dock, then push handle forward and the latch assembly will push the lip into the bed of the trailer. When finished, simply pull handle back towards you and the lip will fall back into its stored position. Standard widths are 66” and 72”
An edge of dock is designed primarily for forklift use. Standard capacity is 20,000 lbs. with a 15” lip.
Recommended dock height is 48”-50” and edge of docks have a limited working range of 5” above dock and 5” below dock. Proper working range is 2-3″ of height differential.
Every edge of dock must be properly mounted. They must be welded to a curb angle or an approach plate and bolted to the dock. Please consult us for the proper way to mount edge of dock levelers, and to determine if an edge of dock is right for you.
Higher capacities and longer lips are available upon request. Contact our sales department for more information.
•One piece design
•Easy-operating, spring assisted bar lift
•High-tensile strength steel
•Operating handle recesses out of the way when not in use but stays secured to the edge of dock
This easy-operating edge of dock leveler designed for quick installation and years of reliability. Standard capacity is 20,000 lbs. and is available up to 30,000 lbs. 15″ lip standard. Working range is 5″ above to 5″ below dock height.
|PRODUCT SPEC SHEET||LITERATURE||OSHA/ANSI REGULATIONS||OWNERS MANUAL|
For Questions About Our Edge of Dock Levelers or to Order, Call 800.535.5303
Freight Class: 60
|KED AP||12”w X94”L APPROACH PLATE W/COUNTERSUNK HOLES||$450.00|
|KED WELD||WELDING CHARGE TO MOUNT APPROACH PLATE TO EOD||$250.00|
|KED-1||MOUNTING HARDWARE FOR KED AP PLATE ((18) 1/2” x 5” Flathead Anchors)||$160.00|
|KED-2||MOUNTING HARDWARE FOR KED LEVELER ((8) 5/8” x 5” Anchors)||$70.00|
|KED 3”RAMP||66”W or 72”W x 30”L x 3”H RAMP||$1,800.00|
|KED 5” RAMP||66”W or 72”W x 48”L x 5”H RAMP||$2,250.00|
|KED 7” RAMP||66”W or 72”W x 51”L x 7”H RAMP||$2,550.00|
|KED 9” RAMP||66”W or 72”W x 61”L x 9”H RAMP||$2,800.00|
Koke Inc. offer Installation services for its dock equipment. We can deliver, install and remove with disposal of your old equipment for you. Here is a helpful guide to installing a dock leveler.Read More
Maintaining the proper operation and safety of your dock levelers and related equipment should be a number-priority, regardless of the frequency in which the equipment is used. There are numerous upgrades and dock leveler replacement parts available for both manual and hydraulic dock levelers. Mechanical…Read More