Hydraulic Edge of Dock levelers offer the quality and benefits of electric hydraulic operation at a fraction of the cost.
The Hydraulic Edge of Dock leveler is quick and easy to operate. Just press and hold the power button and the edge of dock will rotate up, the lip will extend outward. Release the power button and lip will slowly fall onto the bed of the trailer. When finished, simply press and hold the power button until the lip drops off the bed of the trailer. Release the power button and edge of dock will return itself back to the stored position. Deck and lip cylinders assist in the smooth operation of our electric hydraulic edge of dock leveler.
This Hydraulic Edge of Dock is designed primarily for forklift use. Standard capacity is 20,000 lbs. with a 15” lip. Recommended dock height is 48”-50”. Edge of docks have a limited working range of 5” above dock and 5” below dock. Standard voltage is 110V single phase. A 3 phase power pack is available as well.
Every edge of dock must be properly mounted. They must be welded to a curb angle or an approach plate and bolted to the dock. Please consult us for the proper way to mount edge of dock levelers, and to determine if an edge of dock is right for you.
Unit comes complete with Edge of Dock Leveler and (2) 4x12x13 molded bumpers welded to a one-piece back plate. This assures level mounting and reduces installation costs.
Higher capacities and longer lips are available upon request. Contact our sales department for more information.
This easy-operating edge of dock leveler designed for quick installation and years of reliability. Standard capacity is 20,000 lbs. and is available up to 30,000 lbs. 15″ lip standard. Working range is 5″ above to 5″ below dock height.
For Questions About Our Hydraulic Edge of Dock Levelers or to Order, Call 800.535.5303
Freight Class: 60
|PROJECTION FROM BLDG.||Bumpers||OPERATION||LIP
|KHED-3PH||208,240 or 480 3-PHASE||$385.00|
|KED AP||12”w X94”L APPROACH PLATE W/COUNTERSUNK HOLES||$450.00|
|KED WELD||WELDING CHARGE TO MOUNT APPROACH PLATE TO EOD||$250.00|
|KED-1||MOUNTING HARDWARE FOR KED AP PLATE (18) 1/2” x 5” Anchors||$160.00|
|KED-2||MOUNTING HARDWARE FOR KED LEVELER ((7) 5/8” x 5” Anchors)||$70.00|
|KED 3”RAMP||66”W or 72”W x 30”L x 3”H RAMP||$1,800.00|
|KED 5” RAMP||66”W or 72”W x 48”L x 5”H RAMP||$2,250.00|
|KED 7” RAMP||66”W or 72”W x 51”L x 7”H RAMP||$2,550.00|
|KED 9”RAMP||66”W or 72”W x 61”L x 9”H RAMP||$2,800.00|
The difference between a hydraulic and mechanical dock leveler is obvious on the surface – the hydraulic leveler works automatically with the push of a button, while the mechanical leveler is activated with a pull chain. The most important is the cost of ownership. A…Read More
Maintaining the proper operation and safety of your dock levelers and related equipment should be a number-priority, regardless of the frequency in which the equipment is used. There are numerous upgrades and dock leveler replacement parts available for both manual and hydraulic dock levelers. Mechanical…Read More